Commercial campus networks for Burbank businesses. Licensed C-10 / C-7. Fluke-certified. Free local site survey.
Access Cabling's Burbank crews handle Campus Networks the same way we've delivered thousands of commercial installs across California: engineered design, clean pathways, certified terminations, and a labeled patch field a network team can actually work in. Burbank, as a pivotal hub of entertainment and media within Los Angeles County, demands robust and reliable network infrastructure. From the large studio lots near Warner Bros. Campus network design and installation across California — building-to-building fiber backbones, core and distribution switching, unified wired and wireless management for corporate campuses, schools, universities, healthcare systems, and government facilities. Access Cabling handles the full stack: OSP fiber, MDF/IDF, switching, WiFi, and documentation.
Three-tier (core, distribution, access) for large campuses; collapsed two-tier (core-distribution merged) for smaller sites. Every building has its own MDF connected to the campus core over redundant single-mode fiber (typically 24-48 strand OS2), with IDFs on each floor fed off the MDF. Fiber diversity — physically separated pathways between buildings — is standard for critical facilities.
Across Burbank — from Warner Bros to the surrounding Los Angeles County corridor — IT directors and facilities managers pick Access Cabling for the same reasons: a licensed C-10 / C-7 contractor (CSLB 992009), 28+ years of commercial enterprise experience, BICSI-trained crews on-site, and Fluke DSX certification on every port. The result is a campus networks install that a network engineer can drop into on day one — labeled, tested, and warranted for 25 years.
In a dynamic commercial environment like Burbank, successful project delivery often hinges on effective coordination with general contractors (GCs) and property managers. Access Cabling has built strong relationships with firms operating across the Media District, downtown Burbank, and the Empire Center. We integrate seamlessly into larger construction or renovation projects, understanding the critical timelines and multifaceted coordination required. Our crews are skilled at pre-planning to avoid conflicts with other trades, participating in regular site meetings, and providing clear communication on project status. For property managers overseeing multi-tenant buildings prevalent along Olive Avenue and San Fernando Boulevard, we offer flexible scheduling for installations and upgrades, minimizing disruption to existing tenants while ensuring future-ready infrastructure. Our commitment to professionalism, safety, and efficient workflow makes us a trusted partner for GCs aiming for on-time, on-budget project completion and for property managers focused on delivering high-quality, reliable services to their tenants.
Chassis-based (Cisco Catalyst 9500/9600, Aruba CX 10000, Juniper EX) or high-end stackable at the core. Distribution switches with multi-gig ports for APs and 10/25/40G uplinks to core. Layer-3 routing at distribution, VLAN segmentation per building or department. Redundant supervisor and power supplies at critical layers.
Common project types we deliver near Warner Bros and throughout Los Angeles County.
Yes. Almost every Burbank project we run is coordinated with a GC, architect, MEP engineer, or building management team. Our PMs attend OAC meetings, submit shop drawings and rack elevations, coordinate ceiling access windows with other trades, and honor building rules for freight elevator use, badge access, and after-hours work.
Low-voltage installation in Burbank falls under California C-7 and C-10 contractor scope and, depending on scope, may require Los Angeles County building or electrical permits — especially for conduit rough-in, penetrations, and rated-wall firestopping. Access Cabling pulls permits when required and handles inspections directly with the AHJ.
Yes. Many of our Burbank-based clients scale Campus Networks to additional sites across California and nationally. A single PM standardizes drawings, materials, testing thresholds, and closeout format across every location, so IT sees identical documentation whether the site is in Burbank or Chicago.
Sometimes. On Burbank refresh projects we Fluke-test the existing plant first: if runs pass CAT6 or CAT6A channel spec and pathways are clean, they stay. Anything failing certification, abandoned per NEC 800.25, or unlabeled gets removed and replaced. You get a channel-by-channel keep/replace decision — not a blanket rip-and-replace bill.
Rule: install 4x what you need today. Minimum 24-strand OS2 between buildings; 48-96 strands for anchor buildings on the campus core. Fiber is cheap compared to re-trenching.
Yes — full campus as-built with GPS-tagged fiber pathway, splice-case locations, panel port maps, VLAN and IP schema, switch inventory, and AP placement. Delivered as PDF plus GIS-compatible geodata and native CAD.
Access Cabling has extensive experience across Burbank's diverse commercial building types. This includes Class A office towers in the downtown and Media District, large industrial sound stages and tilt-up warehouses, creative office conversions, medical office buildings, and retail centers like the Empire Center. We are adept at designing and installing structured cabling in both new construction and existing tenant improvement projects, adapting solutions to the unique architectural and operational demands of each facility.
28 years, thousands of sites, one accountable contractor. Get a free site survey and an itemized quote in 48 hours.
