Commercial fiber splicing for Davis businesses. Licensed C-10 / C-7. Fluke-certified. Free local site survey.
Davis businesses run on the cable plant behind the wall. Access Cabling designs and installs Fiber Splicing for offices, warehouses, medical suites, and technology tenants across the city — engineered, tested, and documented for the long run. For businesses navigating the dynamic environment of Davis, robust and reliable network infrastructure isn't merely a convenience; it's a strategic imperative. As a hub of innovation and academia, anchored by the vast UC Davis campus, the commercial landscape here demands a cabling foundation that can support cutting-edge research, advanced educational technologies, and the intricate operational needs of local enterprises. Commercial fiber splicing across California — fusion splicing for new-install pigtail terminations, backbone extensions, OSP splice cases, restoration, and mid-span repairs. Access Cabling uses Fujikura 90S+ and Sumitomo T-72C core-alignment splicers with target splice loss under 0.05 dB.
Every splice is verified with bidirectional OTDR traces (averaging in both directions cancels the connector geometry bias). Splices exceeding 0.1 dB single-mode or 0.15 dB multimode are redone. You receive a splice log listing every splice with measured loss, plus .sor OTDR files and a bound PDF report.
Across Davis — from UC Davis to the surrounding Yolo County corridor — IT directors and facilities managers pick Access Cabling for the same reasons: a licensed C-10 / C-7 contractor (CSLB 992009), 28+ years of commercial fiber experience, BICSI-trained crews on-site, and Fluke DSX certification on every port. The result is a fiber splicing install that a network engineer can drop into on day one — labeled, tested, and warranted for 25 years.
Access Cabling's strategic location allows for efficient dispatch and project management across Davis. Our teams are intimately familiar with the city's geographical layout, from the bustling campus core of UC Davis to the growing commercial zones along Mace Boulevard and the Mace Ranch development. This local knowledge translates into faster response times for urgent service calls and seamless logistical planning for larger installations. We minimize travel delays and ensure our technicians arrive equipped with the right tools and understanding of Davis-specific site conditions, whether we're upgrading networks in older downtown buildings or installing new infrastructure in rapidly developing areas like The Cannery. Our commitment to local service ensures that Davis businesses benefit from a responsive and highly-coordinated cabling partner.
Fusion splicing arc-welds two fibers into a single continuous strand — typical loss 0.02-0.05 dB, permanent, reflection-free, and required for any OTDR-certified backbone or single-mode span. Mechanical splices (Fibrlok, Corelink) align fibers in an index-matched sleeve — typical loss 0.1-0.3 dB, field-serviceable, used only for emergency temp repairs where a splicer isn't on-site.
Common project types we deliver near UC Davis and throughout Yolo County.
Sometimes. On Davis refresh projects we Fluke-test the existing plant first: if runs pass CAT6 or CAT6A channel spec and pathways are clean, they stay. Anything failing certification, abandoned per NEC 800.25, or unlabeled gets removed and replaced. You get a channel-by-channel keep/replace decision — not a blanket rip-and-replace bill.
Yes. As a certified installer for Panduit, CommScope, Leviton, and Belden, Davis and Greater Sacramento projects can be registered for a 25-year performance and applications warranty on structured cabling components — copper and fiber, patch panels through work-area outlet. Coverage details are documented in the closeout package.
Timelines depend on drop count, pathway complexity, and after-hours restrictions. A small Davis tenant improvement of 20–40 drops usually completes in 2–5 working days. Larger Yolo County projects with backbone fiber, MDF/IDF buildouts, and multiple floors typically run 2–6 weeks. We publish a per-phase schedule with the quote so your GC and IT team can coordinate cutover.
Low-voltage installation in Davis falls under California C-7 and C-10 contractor scope and, depending on scope, may require Yolo County building or electrical permits — especially for conduit rough-in, penetrations, and rated-wall firestopping. Access Cabling pulls permits when required and handles inspections directly with the AHJ.
Yes — we have mass-fusion ribbon splicers (Sumitomo T-72C, Fujikura 90R) for 4/8/12-fiber ribbon common in high-count OSP and hyperscale data-center trunks. Mass fusion is 5-10x faster than single-fiber splicing on high-count cables.
Yes. We open the existing case, add or repair splices in a new tray, verify all fibers OTDR both ways, re-seal per manufacturer instructions, and pressure-test where applicable. We stock replacement gaskets and buffer tubes for common Corning, 3M, and CommScope enclosures.
Given our strategic presence in the Greater Sacramento region, Access Cabling can typically respond to urgent service calls in Davis within 24-48 hours. For scheduled consultations and project assessments, we prioritize meeting client timelines and can usually arrange an on-site visit within a few business days, depending on project complexity and team availability.
28 years, thousands of sites, one accountable contractor. Get a free site survey and an itemized quote in 48 hours.
