Verkada Camera Installation & Deployment
Access Cabling is the low-voltage installation contractor behind clean Verkada camera deployments — coverage planning, Cat6/Cat6A cabling, PoE network readiness, mounting, testing and documentation for commercial buildings across California.
Independent installation contractor. Access Cabling provides installation, cabling and deployment services for Verkada camera hardware. We are not Verkada Inc., and we do not claim dealer, reseller, certification, partnership or monitoring-service status. Verkada and all related names and logos are trademarks of their respective owners and are referenced here only to describe the equipment we install. For product specifications and capabilities, refer to Verkada's official security camera documentation.
Everything between the telecom room and the camera
Cloud-managed cameras remove the NVR, not the installation. Each camera still needs a properly planned location, a certified PoE drop and a clean physical install.
We walk the building with your security stakeholders, review floor plans, and map camera locations, sightlines, mounting heights and entry points so coverage matches how the space is actually used.
Cat6 and Cat6A horizontal runs from the IDF to each camera position, installed to TIA standards with proper supports, pathways, separation and firestopping where required.
We coordinate PoE switch capacity, port counts, VLAN and uplink requirements with your IT team so each camera has the power budget and bandwidth its form factor requires.
Dome, bullet, fisheye, mini, multisensor and PTZ form factors mounted on ceilings, walls, soffits, poles and exterior surfaces with the correct brackets, boxes and weather details.
Every drop is tested and certified, ports and faceplates labeled to a consistent scheme, and you receive as-built documentation, test results and camera-location records at close-out.
We aim and focus each camera and coordinate with your team or your Verkada reseller during onboarding, device claiming and view verification so the system is usable on day one.
A camera install scope you can hand to procurement.
We quote camera deployments as a defined scope of work — drop counts, mounting types, pathway requirements, rack work, testing and documentation — so you know exactly what is included before anyone drills a hole.
- Site survey and camera coverage walk-through
- Camera count, placement and mounting-height planning
- Cat6 / Cat6A cabling to every camera position
- IDF / MDF rack, patch panel and cable management work
- PoE switch coordination and port planning with IT
- Exterior, parking-lot and pole-mount installations
- Conduit, pathway, support and firestop coordination
- Camera mounting, aiming and focus verification
- Certification testing and labeling of all drops
- Onboarding coordination and view verification
- As-built documentation and camera location records
- Adds, moves, changes and camera expansions later
Hire the trade that owns the cable
Cloud-managed cameras remove NVRs and servers, but every camera still depends on one correctly installed, tested and certified network drop. That is our core discipline.
Structured cabling, telecom rooms, network cabling, fiber backbone, access control and camera installation are all in-house, so nobody is waiting on another trade.
Neat pathways, proper supports, labeled patch fields and documented close-out packages — work you can hand to a facilities team or a building inspector.
Offices, warehouses, schools, medical, retail, restaurants, credit unions and multi-site rollouts across California, with coordinated schedules and after-hours options.
Access Cabling — California Contractor License #992009.
Tell us the camera count and we will scope the cabling.
Send over floor plans, a camera count or just the address. We will schedule a site walk, confirm mounting locations and PoE requirements, and return an itemized quote.
Request a Free Site Survey
A project manager will follow up on scope, scheduling, and next steps — usually within one business day.
- Verkada camera installation
- Commercial · California
Cabling & security services
Camera installation across California
Commercial camera deployments throughout the state, coordinated from our regional offices.
Verkada camera installation questions
Does Access Cabling install Verkada cameras?+
Yes. We provide installation and deployment services for Verkada cloud-managed cameras — site walks, coverage planning, Cat6/Cat6A cabling, PoE and network readiness, mounting, aiming, testing, labeling and close-out documentation. We are an independent low-voltage installation contractor and are not affiliated with Verkada Inc.
Is Access Cabling a Verkada dealer or reseller?+
We do not claim any dealer, reseller, certification or partnership status with Verkada. We install and deploy the hardware and cabling infrastructure, and we work alongside whichever reseller or account team supplies your licenses and devices.
Do you supply the cameras and licenses?+
Licensing and hardware procurement usually run through your Verkada account team or reseller. We can install owner-furnished equipment, and we will tell you clearly during the quote which items are furnished by whom.
What cabling do Verkada cameras need?+
Cameras are powered and networked over a single Ethernet drop using Power over Ethernet. We install Cat6 or Cat6A horizontal cabling from the nearest telecom room to each camera position, terminate and test it, and confirm the switch has the required PoE budget and port count.
Can you install cameras outdoors and on parking lots?+
Yes. We install exterior, soffit, wall, canopy and pole-mounted cameras, including the conduit, weatherproofing and pathway work required to protect the cable outside the building envelope.
Do you handle the network switches too?+
We install and terminate the cabling, dress the racks, and coordinate PoE switch capacity, port assignments and uplinks with your IT team or MSP. We can install switches you provide as part of the scope.
Do you configure the cameras in the cloud console?+
We handle physical installation, aiming, focus and view verification, and we coordinate with your administrators during device onboarding so every camera comes online and shows the intended field of view. Ongoing account, user and policy administration stays with your team.
Can you replace an old analog or NVR-based camera system?+
Yes. We survey the existing system, reuse pathways where appropriate, install new Cat6/Cat6A drops, remove or retire abandoned cabling within the approved scope, and cut over to the new cameras with minimal downtime.
Do you support multi-site rollouts?+
Yes. We regularly deploy cameras across multiple locations with a consistent labeling standard, per-site documentation and one point of contact for scheduling.
What areas do you cover?+
We serve commercial clients throughout California, including the Bay Area, Silicon Valley, Sacramento, Los Angeles, Orange County and San Diego.
Verkada and all associated product names and logos are trademarks of their respective owners. Access Cabling is an independent low-voltage installation contractor and is not affiliated with, endorsed by, certified by or an authorized dealer of Verkada Inc. Product features, capabilities, licensing and warranty terms are determined by the manufacturer; refer to the manufacturer's official documentation. Access Cabling does not provide central-station or third-party video monitoring services on this page's scope of work.
Build the commercial network your business actually deserves.
28 years, thousands of sites, one accountable contractor. Get a free site survey and an itemized quote in 48 hours.