High-density data center cabling to TIA-942 standards.
Free, no-obligation walkthrough. Licensed C-10 / C-7 (CSLB #992009). 28+ years, California & nationwide.
Data Center Cabling from Access Cabling delivers enterprise-grade data center cabling engineered by a licensed low-voltage contractor with 28+ years serving California and nationwide clients. Our BICSI-trained technicians design, install, terminate, test and certify every run to TIA/EIA standards so your infrastructure supports current bandwidth demands and future growth.
Commercial-grade installation, certified performance, and infrastructure built to last 25+ years.
A repeatable, engineered process — refined over 28 years and thousands of sites.
Free on-site survey and needs assessment
Engineered design with rack elevations and pathway plans
Scheduled installation with minimal business disruption
Termination, testing, labeling and documentation
Fluke certification and as-built drawings delivered
Every data center cabling follows TIA-568, TIA-606 labeling, NEC 800 and applicable manufacturer specifications. Fluke DSX Versiv certification and full as-built documentation are delivered at project close.
Local crews dispatched daily from five California offices. Multi-site rollouts across all 50 states.
In the LA / Orange County corridor, projects are dispatched from our Santa Fe Springs office at 10572 Norwalk Blvd, covering Whittier, Norwalk, Downey, Cerritos, La Mirada, and the surrounding industrial corridor.
Structured cabling for enterprise data centers, colocation cages, edge sites, and on-prem server rooms. We design and install copper, single-mode, and multi-mode fiber to TIA-942 and BICSI standards, build the racks and cabinets, run the overhead ladder or under-floor tray, terminate MPO trunks, and hand back a full Fluke and OTDR certification package. Licensed C-10/C-7 (CSLB #992009), operating across California and nationwide for hyperscale, colo, financial, and enterprise IT clients.
We design to the TIA-942 topology every enterprise data center inherits: Main Distribution Area (MDA) for carrier demarc and core switches, Horizontal Distribution Areas (HDA) for aggregation, Zone Distribution Areas (ZDA) as needed for large rooms, and Equipment Distribution Areas (EDA) at each cabinet. Structured cabling — not point-to-point — so growth and MACs don't require pulling new fiber every time a server moves.
Copper CAT6A for out-of-band management, iLO/iDRAC, and legacy 1G/10G server links up to 100m. OM4 or OM5 multi-mode for in-row 10G/25G/40G/100G optics — the current cost-effective choice for most enterprise data halls. Single-mode OS2 for inter-row backbone over 100m, DCI, or where you're planning 400G/800G in the next hardware cycle. We pre-terminated everything possible with MPO/MTP trunks for fast deployment and clean cassettes at each rack.
Standard cabinet spec: 42U or 48U frame from Chatsworth (CPI), Panduit, Vertiv, or APC, dual PDUs (metered or switched, per your requirement), vertical PDU cable management, horizontal patch management every 4-8U, ladder rack overhead or basket tray, and grounding to the room's SRG or ESD bar. Cable dressing follows a strict pattern: patch panels top, switches middle, servers bottom, with data on one side and power on the other.
We install with airflow separation in mind: blanking panels in every unused U, brush strips around cable cutouts, cold-aisle containment doors where the design calls for them, and cable runs above the hot aisle (not blocking supply air). Under-floor plenum designs get the same treatment for the return path.
Data center MACs need choreography. We plan the migration with your ops team — dependency order, port assignments, cable ID scheme, cutover windows, rollback plan — pre-stage the new cabling next to the running production plant, and cut over in maintenance windows with your on-shift staff. Old cabling is removed to code (NEC 645) and copper recycled. Every certified link is documented before and after.
Every fiber strand OTDR-tested from both ends with insertion loss and length verified against the loss budget. Every copper link Fluke DSX-certified. Deliverables: labeled patch schedules, rack elevations (Visio or SketchUp), overhead/under-floor layout, fiber map with strand assignments, OTDR traces, Fluke reports, warranty registrations, and a labeled photo record of each cabinet built.
Share your scope — square footage, drop or device count, and timeline — and a senior estimator returns a written, itemized proposal within 48 hours. Free site survey, no obligation.
Vendor-agnostic. We specify best-in-class components for each project — copper, fiber, racks, power, wireless and access control from the industry's leading manufacturers.
Brand references reflect products Access Cabling has installed on commercial projects. Trademarks are the property of their respective owners.
Yes. Every enterprise data center we build or expand follows the TIA-942 topology (MDA/HDA/ZDA/EDA) with BICSI-recommended cable management, redundancy, and separation. We're comfortable working to your existing rated tier (I-IV) and to specific colo cage standards from Equinix, Digital Realty, CoreSite, and others.
Both. Copper CAT6A for management, iLO/iDRAC, and 1G/10G to legacy servers. Multi-mode OM4/OM5 for 10G-100G in-row links (most cost-effective in a typical enterprise room). Single-mode OS2 for inter-row backbone, DCI, and where you're planning 400G+ in the next refresh cycle.
MPO/MTP trunks between rows and to aggregation cabinets — faster to deploy, cleaner in the pathway, and future-ready for higher-lane-count optics. Discrete LC jumpers inside the cabinet from cassette to switch/server. This is the standard enterprise pattern we've deployed thousands of times.
Yes. Turnkey scope routinely includes cabinet install (CPI, Panduit, Vertiv, APC, Middle Atlantic), dual PDUs, blanking panels, ladder rack or basket tray overhead, ground bar, and vertical/horizontal cable management. We coordinate power drops with the electrical trade or an in-house EC as needed.
Yes — most of our data center work is in live rooms. We pre-stage cabling in the pathway next to the production plant, work behind blanking panels or in unused cabinet space, and only take a rack down during your scheduled maintenance window. No production cable is disturbed without your ops team on the change ticket.
Yes. We do a growing amount of AI cluster work — high-density GPU rows, NVIDIA InfiniBand and NDR/HDR fiber, direct-attach copper (DAC/AOC), and structured 400G/800G aggregation. See our AI data center infrastructure service for the full scope.
Yes. Every strand is OTDR-tested from both ends with insertion loss and length verified against the loss budget, plus power-meter/light-source verification for short reach. Copper links are Fluke DSX-certified. Full reports delivered with as-builts.
Yes. We do a lot of colo work in Equinix, Digital Realty, CoreSite, Sabey, and regional carrier hotels — including cage-side cabling from carrier demarc, MMR cross-connects, meet-me room LC/MPO patches, and cabinet buildouts. Compliant with each provider's install standards.
Yes. Abandoned cable in a data center is both a code issue (NEC 645/800.25) and an airflow issue. We remove old cabling, decommission racks, recycle copper, and provide chain-of-custody documentation for any secure disposal requirements.
Full compliance with TIA-607 and BICSI TDMM: signal reference grid (SRG) or common bonding network (CBN), each cabinet bonded to the ground ring, patch panels and cable trays bonded, and continuity tested. This is not an optional line item — it's baseline in every scope.
Yes. Data center MAC and migration work is almost always nights or weekends inside your change window. We plan the sequence with your ops team, have rollback ready, and staff the shift with senior technicians.
Data Center Cabling pricing depends on drop count, cable type, pathway complexity, and building conditions. Most commercial projects range from $150 to $350 per drop installed. Request a free site survey for an itemized quote.
Yes. Access Cabling is headquartered in California with a nationwide technician network for multi-site rollouts across all 50 states.
Every installation is Fluke-tested and certified. Structured cabling installs carry manufacturer warranties of up to 25 years through our Panduit, CommScope, Leviton and Belden partner relationships.
Server room design including power, cooling and cabling layout.
Rack, cabinet and PDU installation with cable management.
Two-post and four-post network rack build-outs.
Vertical, horizontal and overhead cable management systems.
Modular patch panel installation, termination and labeling.
Main distribution frame design and build-out.
28 years, thousands of sites, one accountable contractor. Get a free site survey and an itemized quote in 48 hours.
